The Track Saw Forum  

Go Back   The Track Saw Forum > The Track Saw Forum > Clamping Systems

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 12-01-2017, 10:21 AM
kenk kenk is offline
Join Date: Feb 2012
Posts: 288
Default Fastening EZ Smart Clamping Table Top to 2x4 Frame

I recently adopted an EZ Smart Clamping Table Top, and was planning to make a simple frame and legs/braces using 2x4's.

I figure I'll rip the top edges of the 2x4 frame pieces to ensure that they are perfectly flat, and I"m planning to put two cross braces under the table, just to ensure that there is no sag over time.

My plan was to use (Kreg) pocket holes to fasten the Clamping Table Top to the 2x4 frame. Do you foresee any troubles with the pocket hole screws going into the bottom of the table top's MDF? I assumed it is MDF - I think I had read that mentioned in one of the descriptions - somewhere.

I'll do some test pocket holes on scrap to make certain the screws won't accidentally go through the surface of the table top (gasp!!).

By the way, I had always assumed that the EZ Smart Clamping Table Top's extrusions were fastened with screws, but instead Eurekazone takes no chances and clearly does not cut corners on this product - the extrusions are actually fastened with bolts that go all the way through the entire thickness of the table, and the bolts are fastened using T-nuts on the bottom (see pic below).

I also assumed that the table's orange surface was just laminate, but clearly it is some other kind of coating that was applied after cutting the dadoes. Not exactly sure what it is, but it looks great. Time will tell how tough it is.
Attached Thumbnails
Click image for larger version

Name:	P1050143.jpg
Views:	91
Size:	23.2 KB
ID:	7263  

Last edited by kenk; 12-01-2017 at 10:29 AM.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -3. The time now is 02:39 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.