The Track Saw Forum  

Go Back   The Track Saw Forum > The Track Saw Forum > Power Benches

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-26-2018, 05:55 PM
JarOfSonicMen JarOfSonicMen is offline
 
Join Date: Jul 2011
Posts: 10
Smile Ez-1 conversion

Hi. So, itís been a year or two...or 6...since I was here last.

Has anyone converted their EZ-1 from the old style with the beam to the new style with the sliding rails? Is it possible? I can guess what parts it would require, but is their a list? Or was there some design change that makes it difficult?

Iím finishing up a large washer/dryer pedestal for the wife, and see a lot more woodworking in my future than in the last few years. :-)
Reply With Quote
  #2  
Old 05-27-2018, 12:47 PM
sean9c sean9c is offline
 
Join Date: Jan 2010
Posts: 1,245
Default

I'd wonder why you'd bother to change. Is there something about the version that you have that you don't like?
Reply With Quote
  #3  
Old 05-27-2018, 04:35 PM
kenk kenk is offline
 
Join Date: Feb 2012
Posts: 285
Default

I get the feeling that the conversion from the beamed EZ1 to the current one was mostly for simplicity and maybe cost reduction - rather than for easier usage.

From what Dino has been saying, the future changes will be for similar reasons.
Reply With Quote
  #4  
Old 05-27-2018, 04:42 PM
kenk kenk is offline
 
Join Date: Feb 2012
Posts: 285
Default

I get the feeling that the conversion from the beamed EZ1 to the current one was mostly for simplicity and maybe cost reduction - rather than for easier usage.

From what Dino has been saying, the future changes will be for similar reasons.
Reply With Quote
  #5  
Old 05-27-2018, 05:07 PM
Dino Dino is offline
Master Carpenter
 
Join Date: Jul 2008
Location: Edison NJ
Posts: 5,103
Default

Quote:
Originally Posted by kenk View Post
I get the feeling that the conversion from the beamed EZ1 to the current one was mostly for simplicity and maybe cost reduction - rather than for easier usage.

From what Dino has been saying, the future changes will be for similar reasons.
Hi.
The sliding fences allows for drop-in modules and unlimited versatility.
The goal is to lower the prices ( always) and offer more usage.

The current design is very flexible and ready for many new applications
that are under testing and development for the last 4-5 years.
We will see few hick-ups on the way to ez simplicity and unlimited versatility.
I hope we all stay strong for the last ez push.

Going from dino's ez to ez for all people and applications is not easy.
New tools systems, ways and more are under development and we will start in 1-2 weeks...with the arrival of the Pyramids and the new UEG.

tx
__________________
ycf dino
eurekazone.
Reply With Quote
  #6  
Old 06-05-2018, 09:18 PM
Tw218 Tw218 is offline
 
Join Date: Sep 2012
Posts: 107
Default Drop in module

Would it be possible for you to show us an example of what a drop in module might look like and what could be done with it I'm also looking forward to seeing some ideas of your new pyramids and what they might be used for . I myself have always had and easy one table but after reading all the videos I always thought maybe the old being Style table was better with the beam under the bridge was the best but I haven't seen much Conversation as to why the sliding tops are better I myself like the fence to be at the top of the table as the wood seems to always want to walk forward
When the Bridge is lowered or possibly the height of my bridge is wrong although listening to what you say it wouldn't be possible
Reply With Quote
  #7  
Old 06-05-2018, 09:35 PM
tofu tofu is offline
 
Join Date: Aug 2012
Location: nyc
Posts: 633
Default

I imagine common drop in modules would just be something like a router table or clamping station, or a stand for your miter saw. Bolt whatever tool to a 3/4" piece of plywood and stick it between the sliding extrusions
__________________
-Christopher

*Disclaimer: I know what i'm talking about 50% of the time, every time...
Reply With Quote
  #8  
Old 06-06-2018, 06:30 PM
kenk kenk is offline
 
Join Date: Feb 2012
Posts: 285
Default

I think by "drop-in modules" Dino is indicating that the sliding rails allow placement of 3/4" plywood (or similar material) into the recesses area between squaring/sliding rails. This is shown in the pics shown in the EZ-ONE web site.

The drop-in module can be just plain plywood to act as a table, a table with something attached to it - such as a Kreg Jig, or a jig that is fastened to that plywood for whatever purpose - such as the Drawer Body Jig. Your usage of the drop-in ability is limited only by your imagination.

Because the rails slide, that drop-in module can be as long as needed - so long as it fits between a set of rails. It can be as wide as the rails are long (or I guess longer), though if in place during a cut it will be cut by the saw.

Last edited by kenk; 06-06-2018 at 06:52 PM.
Reply With Quote
  #9  
Old 07-17-2018, 11:29 AM
EliDuf EliDuf is offline
 
Join Date: Jul 2018
Posts: 1
Default

I'm blown away by that kind of functionality, Kenk. You're so right when you say the use is only limited by imagination.
Reply With Quote
  #10  
Old 08-05-2018, 01:09 PM
Dino Dino is offline
Master Carpenter
 
Join Date: Jul 2008
Location: Edison NJ
Posts: 5,103
Default

Quote:
Originally Posted by EliDuf View Post
I'm blown away by that kind of functionality, Kenk. You're so right when you say the use is only limited by imagination.
Eli,
the ez concept is almost 20 years new now.
This is how long it take for Delta to buy the Fence by Beismier? ( typo here)
Now the the ez tracksaws , ez-one's-ssrk-smart tables,UEG's
smart clamping system, antichip protection and few more ez things....
we can setup dedicated production lines and not only lower the cost and final prices but offer more versatility and ease of use.
ALWAYS under the Dead Wood Concept theory...even if you move the wood.

The Bridge now is on special at $150.00? (from $250.00) 1
the 4 Pyramid kit with more parts at less than $40.00
the Ez-One at $1.000 fully loaded ( From $1499.00)

Anyway...ez is here to stay forever and the new tools will include more trades.
I'm working with the NY university to validate all new systems, ways, methods and tools for the industry. Schools, Unions, Vo-tech and more.
even if I have to go "NFP" ( not for profit) I'm ready to go.

Fast Track.
tricks, trades and tools.

for: Framing, Carpentry, Drywall, Finishing, painting , Flooring and just about All interior trades. We deal with exterior later.

This is EZ and as always we will need the support of all loyal customers, friends, inventors and more. More capital, more people and more health.
without your mental and physical health....there is no such of thing as ez.

thanks for posting
d


Just for the fun of it.
I had a crew doing some work in the house.
That included demolition-framing-carpentry-drywall
-painting- tiles-electric and plumping.

The contractor knew that I was a contractor before and he was willing to learn few tricks. well, I show him how to do easier-faster and stronger framing using a modified grinder and how to cut crown molding without a tape measure and a chop saw. On the step ladder. He estimated 50% labor savings and a much better job with no drywall dust ( zero) and with perfect walls that was ready for tiles.

this is the new ez. I hope we will see it soon.
__________________
ycf dino
eurekazone.

Last edited by Dino; 08-05-2018 at 02:57 PM.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -3. The time now is 12:47 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.