Details of the EZ Power Bench tm

[Dino]

Hi Guys.
Few more pictures of the SPB.
More to follow next Monday.

[Dino]

Pic#1. Few screws to secure the plywood top at the table.
(Screw only at the plastic)
Pic#2-3. Use the squaring stops to align the First ( squaring ) SME even with the table side.
Pic#4. Use provided screws to secure the SME's to the Plywood top.
Pic#5. Use a story stick ( 12" spacer ) ( we use a 12" square) to set the 2 middle SME's
parallel to the squaring SME.

The most important step is to set the bridge rail square to the Squaring SME.

[Dino]

Squaring the Bridge.

Pic#1. Step 1. First step is to make sure that the Bridge rail is Square to the Table. ( horizontal plane)
Pic#2. Step 2. Square to the Table at Vertical plane.
Pic#3-4-5. Square at all heights. ( comes natural After step 2)

[Dino]

The top kit, squaring stops, flip stop .

[Dino]

Please, read the A,B and soon the C.
http://cgi.ebay.com/ws/eBayISAPI.dll...m=320440302063

Enjoy.
The fully equipped SPB is $1450.00
Includes: Everything that you see on the pictures.
Thanks.

If you have the B-300
The SGS system,
Use your own legs...the price is much less.

We will post the complete SPB and all he kits that made it.
A. Leg kit. ( Set of 4) RTA predrilled and with one coat of sanding sealer.
B. Bottom Brace kit. ( 8 feet of btb extrusion) we can use wood instead.
C. Tilt top kit. ( 8 feet of btb top braces plastic, 2 aluminum bars)
D. Frame kit. ( 16 feet of the Super SME/BTB extrusion)
2 plastic sides U shaped 3/4"x 5" x 70" total, predrilled and with 16 connectors, plus two sliding nailers.
E. Top Kit. Four, 48" long (SME) extrusions.
F. B-300. ( Bridge) One set, Two Bridges.
G. SGS-70". A complete SGS 70" guide system.

The Complete SPB, is fully assemble and tested before we take it apart in three boxes. Ship Via UPS ground for $150.00.

One box contains the Leg Set and the B-300.
Second Box contains the complete SGS-70"
Third Box contains the frame kit fully assemble and ready
to be dropped into the leg system.

We estimated the time to put the SPB together around 30 to 45 minutes.
Every part is numbered when we assemble the complete SPB
( painters tape and magic marker) and no instructions needed.
Very easy with matting numbers.
I will try to find and post few pic's today.
Thnaks.

How many ways we can misspell thanks and still read it?